Applies to Auzen X-Mystique,
X-Plosion, and X-Meridian Soundcards
For the soundcards listed above, the following
questions are addressed on this page:
to FAQ page
Q : Why is there is no
Analog sound with Front R/L speakers?
A :First, please check your connections.
The third port from the top is for
Front Left/Right analog port.
Second, please check the adjustment for
each volume of speaker at the main tab in Xear3D.
the guage for front channel is minimum, the sound does
not come out through the speakers.
Q : Why
is there no sound from the Microphone (or Line
A :Check the "Monitoring" button for MIC
(or Line In).
Go to the Mixer tab and check the
Click the hammer Icon to launch the Settings
window. Use "20dB MIC Boost."
Q: How can I play 5.1 channel digital surround
sound through Optical/Coaxial port in Windows
the steps below.
Right click the speaker icon >
Playback device >
Set Speakers as the default
Your decoder will display the mode according to the
setting in Xear3D.
If you set the "Digital Output" as Default Device,
the digital sound comes out as 2-channel and your
decoder does not display the "Dolby Digital" or "DTS"