Top | Gallery | Features | Specifications | Compatibility

X-Tension DIN in box (above).




X-Tension DIN (above) for select sound cards.
Click image to enlarge in new a window




X-Tension DIN with cables attached (above).
All cables are included. See below.
Click image to enlarge in new a window

Connecting to the X-Tension DIN (above)
Click image to enlarge in new a window

X-Tension DIN Package Contents (above)
Data cable for connecting soundcard (top left), Auzen X-Tension DIN board (top right),
Data cable for transferring microphone input to soundcard (bottom left),
User Guide including Warranty Card (bottom middle), MIDI cable (bottom right)
Note: Not to scale. All items have a quantity of one (1).

Compatible digital speakers from Creative Labs™.
Connect to the G9 Digital Multi Out jack.
For list, see Compatibility.

Top | Gallery | Features | Specifications | Compatibility

Features

X-Tension DIN Connectors (above)
Click image to enlarge in new a window

1. Mic In: The input for dynamic-microphone. In total, three microphone inputs are available (Microphone input of the soundcard, FP_AUDIO, Auzen X-Tension). When the jumper switch 9 is set to ‘ON,’ this input changes to a condenser microphone input that supports 5V power (Caution: "Phantom power" is not supported. Do not use a phantom microphone.)
2. MIDI In: 16 channels of MIDI signal input.
3. MIDI Out: 16 channels of MIDI signal output.
   
4. Digital In: Supports coaxial and optical input.
5. Digital Out: Supports coaxial and optical output.
6. G9 Digital Multi Out: Output supporting 24Bit 96kHz LPCM or PCM 8ch. Compatible with digital speakers from Creative Labs™.
7. EXT_MIC Connector: Transfers microphone input data. Used with the 4pin-4pin cable to connect to the soundcard.
8. Data Cable Connector: Used to connect the soundcard and Auzen X-Tension DIN.
9. Jumper 1: Default setting is ‘OFF’ for dynamic microphone. When set to on ‘ON’, 5V will be provided to the microphone input for use with a condenser microphone.
10. Jumper 2: This jumper is related with the type of digital signal. For the X-Meridian, set this jumper to ‘OFF.' Other settings may be appropriate for future soundcards.
    
    

Specifications

Mic Preamplifier
1) Peak level : 0dBFS @ -40dBV
2) Gain Adjustment : Gain +20dB up
3) 5V power supply (Condenser Mic)
4) Connector Type : 1/4” TRS Input  

MIDI I/O
1) 1-in, 1-out 16 MIDI channels in and out
2) Connector Type : MIDI Standard MIDI 5-pin DIN

Digital In
1) Connector Type : RCA or Optical Combo
2) Format : IEC-60958 Consumer(S/PDIF)
3) Sampling Rate :44.1,48,96,192kHz
4) Resolution : 24-bit

Digital Out
1) Connector Type : RCA or Optical Combo
2) Format : IEC-60958 Consumer(S/PDIF)
3) Sampling Rate :44.1,48,96,192kHz
4) Resolution : 24-bit

G9 Digital Out
1) Connector Type : 9-pin Mini Din Jack
2) Format : IEC-60958 Consumer(S/PDIF)
3) Sampling Rate :44.1,48,96,192kHz
4) Resolution : 24-bit

 

Compatibility

The X-Tension DIN is to be used with the following list of soundcards and devices. Select future Auzen soundcards will be compatible with the X-Tension DIN.

• Auzen X-Fi Prelude
  • Midi In, Midi Out, and SPDIF Out: Compatible
  • Mic In, SPDIF In, DIN: Not Compatible
    
    Please read the X-Tension DIN Installation Manual for the X-Fi Prelude before purchasing the X-Tension DIN.
    Soundcard User Manuals Page
    
    See announcement about these incompatibilities.
    
    
• Auzen X-Meridian 7.1
  
  
• Digital speakers from Creative Labs™ via the G9 Digital Multi Out jack.
  
  • Cambridge Soundworks Digital Desktop Theater 5.1 DTT2500
    
  • Cambridge Soundworks FPS2000 Digital Speakers
    
  • Cambridge SoundWorks DTT 3500 Digital 5.1 Surround Speaker System
    
  • Creative Inspire 5.1 5700 PC multimedia home theatre speaker system