Microphones » Infrasonic UFO# [sharp] USB Powered Condenser Mic
All You Need is UFO.
Coming Soon
The UFO# (pronounced UFO "sharp") is a condenser Microphone including built-in Phantom power supply, USB powered pre-amp and USB audio interface in one-single device.
It provides professional studio sound quality with a large diaphragm (1” Gold plated). It even includes PAD adjustments and Low frequency cut filter bring you more flexibility. Enjoy ultra low-latency of less than 1ms for real-time monitoring, thanks to custom Infrasonic driver technology. Simply connect UFO# to your computer and record.
Ideal for...
Vocal recording
Be a vocal!
Record your voice, narration and more.
Instrument recording
Be a musician!
Record your guitar, bass and piano. Be a more creative musician with UFO#.
Podcasting and Broadcasting
Be a broadcaster!
You can have your own podcasting center with the UFO#.
Features
• The USB powered condenser microphone
• Ultra low-latency response from custom driver technology (1ms)
• Plug into any computer’s USB port
• 3.5 mm TRS (Stereo) mini phone jack for both headphone and line out
• Cardioids polar pattern
• Flat frequency response
• Adjustable the input gain by -15dB.
• Low frequency cut filter switch at 75 Hz cut off
• PAD switch: Selectable between 0 dB and -10 dB
• Included in the package is a microphone mount, pouch, plastic case, USB cable and installation CD.
• UFO USB mic supports both Windows® and Macintosh operating systems.
Images
UFO# USB Microphone with shockmount (available separately). Click to enlarge.
In-depth Features
• Pre Amp Attenuation Control: -15 dB ~ 0 dB
Control the input sound level (your voice) with the Pre-Amp gain controller. If it is too loud or "clipped," open the cover of UFO# then "tweak" the knob as you like. Factory default is 0 dB.
• PAD control (-10 dB and 0 dB)
Unlike Pre-Amp gain control, PAD is used to set the output level of UFO#. Use PAD to switch between -10 dB and 0 dB. If you need to reduce the output level of UFO# to avoid speaker damage or clipping, just set it at -10 dB.
• Low Frequency Cut (75 Hz) Filter
When you record your voice or instrument, additional noise can easily show up in the low frequencies. The Low Frequency Cut Switch removes such noise, and provides an easy equalizer feature, since activating the low frequency cut filter can make the sound brighter.
Just select the cut-off frequency on the UFO# body surface.
Control Panel
• Monitor ON and OFF
• Level Faders(Input, Waveout, Master)
• Channel LINK and MUTE
• Latency configuration (1ms ~ 10ms)
Hook Up
Package
UFO#
Dimension
Weight
Product
50x190x33 mm
0.44 kg
Packge Box
264x180x82 mm
1.22 kg
Minimum System Requirements
PC
Intel Pentium 4 or equivalent and compatible CPU
Motherboard with chipset supporting the
Intel Pentium 4
256MB of RAM
One available USB port
Microsoft Windows® XP or later
Mac
Macintosh with G4 or better processor
256MB of RAM
One available USB port
Mac OS 10.3 or later
Specifications
• Polar Pattern: Cardoids
• Sensitivity of Microphone: (1kHz) 30mV / 1Pa (94dB) SPL
• Noise Level: 4uV
• HP/Line Amp Output Impedance: < 2 ohm
• Load Impedance of Headphone: 30 - 300 ohm
• Resolution of Digital Parts: 16 bit
• Sample Rates of Digital Parts: 44.1 kHz and 48 kHz
Auzentech is a trademark of Auzentech, Inc. INFRASONIC, BLOW5, BLOW5D, BLOW4, BLOW4D, INFRASONIC DeuX, INFRASONIC AMON, INFRASONIC Quartet, and JamMate, and SIMS Audio are trademarks of SIMS Corporation. All other trademarks remain the property of their respective owners.
PRODUCTS
